ESD Simulator ESS-S3011A/GT-30RA
Electrostatic Discharge Simulator ESS-S3011A/GT-30RA
EN/IEC 61000-4-2 Ed2 & ISO 10605 Ed2 Compliant
SMART ESD simulator which supports all phases of the test (Pre to Post)
Features:
- EN/IEC 61000-4-2 Ed2 Compliant.
- ISO 10605 Ed2 Compliant (Note: Optional gun head and CR units are required.)
- Pre-test
3 pre-checking functions” taking the confirmable test into the account CR constant indicator” to ensure correct attachment is in place - During test:
- “Ten-key & Rotary knob” to ease the setting.
- “Infra-red Remote Controller” to allow remote Generator setting.
- “Discharge Detecting Function” to realize the air-discharge confirmation.
- “Lightest Discharge Gun in the market” for better continuous operation.
- “White LED light” to show Discharging points
- After test
“Control Software” for Test Result Reporting and PC Control free-downloadable from NoiseKen web-site
Specifications:
- ESD Simulator Main Unit Model : ESS-S3011A .
| Items | ESS-S3011A specifications |
| Polarity | Positive or negative |
| Output voltage | 0.2 to 30.0kV +/-5% (30.5kV Maximum) 0.2 to 10kV: 0.05V step, 10.0 to 30.0kV: 0.1kV step |
| Repetition cycle | 0.05s to 99.9s +/-10% / Manual 0.05s to 10.0s: 0.05s step, 10.0 to 99.9s: 0.10s step |
| No. of time of discharge | 1 to 60,000 times /continuous |
| Discharge mode | Contac discharge / Air discharge |
| Radiation level mode | Normal mode / Extra mode |
| Trigger mode | Gun trigger / Main unit trigger / External trigger |
| Operation panel | Color LCD / Push-buttons (Partially lighting) |
| Gun holder | Standard attached (to hold the discharge gun Model GT-30RA) |
| Radiation mode select switch | Extra / Normal switching function built-in |
| Discharge detection | Discharge detection function in air-discharge mode equipped |
| Pre-checking function | Following 3 steps function equipped (by under operation. Not the calibration but just checking) SETP 1 High voltage output checking STEP 2 Withstanding voltage checking STEP 3 Discharge relay operation checking |
| CR & Gun head checking | CR constant and gun head recognizable (with an indicator to prevent the wrong combination) |
| IEC standard test mode | Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step |
| Manual test mode | Contact/Air discharge mode: 0.20kV to 30.0kV Sweep function available Up to 50 units (test settings) storable. |
| Sequence test mode | Seamless run of the selected test sequence No. of steps per one sequence: up to 22 steps No. of test sequences: up to 20. |
| Warning lamp | Lights up while the HV circuitry is on. Blinks while discharges are in progress. |
| Charging capacitor and resistance | 150pF +/-10%, 330 ohm+/-10% (built into Discharge Gun GT-30RA) |
| Main unit charging resistance | 10M ohm (53M ohm for combination with Discharge Gun GT-30RA) |
| AUX connector | D-SUB 15 pin, female connector Connection of Warning Lamp (optional) Connection of Automatic ESD Eliminator (optional) External interlock input External trigger input |
| Optical communication connector | Optic connector for PC communication (serial interface) |
| Power supply/ Power consumption | 100V to 240V AC, 50Hz/60Hz +/-10% 75VA |
| Included accessories | Remote controller 13-00004A, Gun holder, Instruction manual |
| Dimensions and weight | (W) 270 X (H)312 X (D)295 mm Approx. 7.0kg (gun holder excluded) , Approx. 7.5kg (gun holder included) |
- Discharge Gun Model : GT-30RA
| tems | GT-30RA specifications |
| Output voltage | 30.5kV Max |
| Polarity | Positive or Negative |
| Repetition cycle | 0.05s and over Note) Guaranteed value is 0.1s and over (330pF and under) |
| Discharge mode | Contact or Air |
| Charging resistor | Built-in CR unit |
| Charge/Discharge capacitor & Discharge resistor | Built-in CR unit |
| High voltage connector | Composite connector of high voltage and signal line (male) ｡ﾊNoiseKen custom) |
| Operation switch | Discharge trigger |
| LED irradiator | White LED light built-in for irradiating EUT ｡ﾊFocusing point is the tip) |
| Included accessories | CR unit (150pf-330 ohm) 06-00073B Conical discharge tip 12-00007A Round discharge tip 12-00008A Instruction manual |
| Dimensions and weight | (W) 83X (H) 217 X (D) 229 mm (projection excluded) Approx. 0.8kg (Cable and connector excluded) Approx. 10.8kg (Cable included, connecter excluded) |